The Gloworm CX takes innovation to a new level. The CX is much more than a well-priced commuter light – the CX takes all-in-one lighting into the future. The CX uses custom replaceable optics to produce a beam perfect for the desired application, for convenience it is USB chargeable and can be mounted seamlessly on the bars or helmet.
Weighing only 200 grams, the CX can be charged whilst being used meaning it can be charged using a dynamo USB device. The CX is OTG (On The Go) capable and can be used to charge other devices, such as your phone or GPS.
The CX has a replaceable battery for extended runtimes and utilises common mounting sytems for ultimate versatility.
Customise Your Light Ouput – IMT (Intelligent Mode Technology)
IMT defines the Gloworm ethos of versatility. IMT provides the freedom to use the Gloworm light in the default settings or to completely customise for ultimate personalisation.Default Settings
Trail – Low / Medium / High. Special mode: Super Dim
Commute – Low / High. Special mode: Flash (1 Flash every 2 seconds – Flash pattern is High/Low/High)Special modes are activated by holding down the button for 2 sec. This allows the user to conduct any outdoor activity without having to cycle through the special mode and having an interruption of a steady light beam. Additionally, the X2 is shut down by holding the button for appx 5sec. IMT gives you the flexibility of refined programmes and modes without needing to access them every time you go from High mode back to low.
1200 Lumens (independently verified by mtbr.com)
6.8 AHr Lithium Ion Battery
2 X Cree XP-G2 LEDS
2 replaceable Optic system (Spot/Flood)
2HR runtime on max brightness
5HR USB Battery charge time (dependent on state of charge)
Quick Release Helmet Mount (can be used with GoPro)
31.8 Quick Release handlebar mount
6.8mAH Lithium Ion Battery
Spare optics (Wide Angle/Spot)
Micro USB Cable
Battery mounted fuel guage
Overheat and Overcharge Protection
TRAIL ? LOW>MEDIUM>HIGH. SPECIAL MODE>SUPER DIM (All programmable to user requirements)
COMMUTE ? LOW>HIGH. SPECIAL MODE>FLASH (2HZ) (All programmable to user requirements)
Special modes are activiated by holding down the button for 2 seconds. This allows the user to use the light without the need to cycle through the special mode (or off) and therefore interupting the steady beam of light.
The light is shutdown by holding the button for approximately 5 seconds. IMT gives the user the flexibility of mulitple programme options without being restricted to factory settings.